Contactless Rotary Sensor - Single and Dual Output

Product Code: SRH280P/DP

Penny+Giles announces two new versions of the popular SRH280 contactless rotary position sensor, which uses a factory programmable non-contact Hall effect sensor system. 

SINGLE OUTPUT CHANNEL - SRH280P
DUAL OUTPUT CHANNELS - SRH280DP

SRH280P & SRH280DP provide reliable and accurate rotary position measurement in extreme motorsport and industrial environments where shock and vibration can occur. These new sensors use the popular 28mm flanged housing with a protection rating to IP68.

SRH280P & SRH280DP operate from either 5Vdc regulated or 9-30Vdc unregulated power supply and are available with analog (0.5-4.5Vdc) or digital (PWM) output signals.  The sensor is factory programmable, allowing you to specify the output signal type, the measurement range (0-20° to 0-360° in 1° increments) and the output direction (clockwise or anticlockwise).

The sensor has a 12 bit resolution (0.025%) over the selected measuring range, and operates from -40 to +140°C when powered at 5Vdc.

These SRH280P & SRH280DP versions replace the former model SRH280.

Key Features

  • Contactless - Hall effect technology
  • Single or Dual output channels
  • 5Vdc or 9-30Vdc supply
  • Total sensor measurement range from 0-20° to 0-360°
  • Analog or Digital (PWM) output
  • 12 bit resolution over selected measuring range
  • Low noise level (1mVrms) on output signal
  • Operating temperature -40° to +140°C
  • Environmental protection to IP68
  • Crush-proof mounting flange with steel inserts
  • Rapid availability      


Specification
See RELATED DOCUMENTS for more details.